Fast setting tile adhesive
- High initial adhesion
- Tile installation from the top of the wall
- Grouting after 4 h at ≥18°
- Recommended for staircases and hallways
- For standard and heated surfaces
CERAMICS GRES STONE
Application and properties:
- CEKOL Q-7 EXPRESS is a cement-based adhesive (C) with improved technical parameters (2), fast setting (F) with reduced slump (T) and extended open time (E), C2FTE
- It can be used to bond ceramic, stoneware and natural stone tiles to concrete, brick, aerated concrete, expanded concrete, LECA blocks, gypsum boards and blocks, plasterboard panels, seasoned cement and cement-lime plasters and single-layer gypsum plasters
- Fast setting time (about 4 hours) enables quick repair works
- CEKOL Q-7 EXPRESS recommended for quick installation of small and medium sized tiles
- Reduced slump enables tile installation from the top of the wall
Application:
Substrate preparation
The substrate should be clean, dense and free of grease; any emulsion or oil paint residues and loose sand grains should be removed with a spatula or rough brush.
Mortar preparation
The mortar should be prepared by pouring 1 kg of powder to 0.19 – 0.21 l of water (3.8 – 4.2 l of water for a 20 kg bag), and then mixed thoroughly with a slow mixer to a uniform consistency. Wait approx. 3 minutes and mix thoroughly again. Prepare enough adhesive mortar to be used within 30 minutes.
Application
Apply the adhesive to the prepared substrate using a notched trowel. For heated surfaces, turn off the heat before installing the tiles. Turn on at least 7 days after tile installation. When bonding highly absorbent tiles and stoneware tiles outdoors, apply CEKOL Q-7 EXPRESS in a continuous coat both on the substrate and on the underside of the tiles, which will greatly increase adhesion. Provide a waterproofing layer in areas prone to water seepage.
TECHNICAL data
- Meets requirements EN 12004:2007+A1
- Type C2FTE
- Bond strength expressed as: initial adhesion ≥ 1 N/mm²
- Bond strength expressed as: early adhesion ≥ 0.5 N/mm²
- Bond strength under conditioning/heat ageing conditions expressed as: adhesion after thermal ageing ≥ 1 N/mm²
- Bond strength under wet/moist conditions expressed as: adhesion after immersion in water ≥ 1 N/mm²
- Bond strength under freeze-thaw cycling conditions expressed as: adhesion after freeze-thaw cycles ≥ 1 N/mm²
- Proportions of the mixture: 1 kg of powder into 0.19 – 0.21 l of water
- Tile correction time: 10 minut
- Consumption: per 1 m2 with a 10 mm notched trowel is approx. 2.7 kg
- Layer thickness: up to 10 mm
- Application and substrate temperature + 5°C do + 25°C
- Suitability for foot traffic and grouting: approximately 4 hours at ≥18°C
- The product has hygienic approval
- Slump (T): ≤ 0,5 mm
- Extended open time (E) adhesion: ≥ 0.5 N/mm² after no less than 10 min
- package 20 kg EAN: 5906474170209
- CN 3214190
More information : https://cekol.pl/en/oferta/cekol-q-7-express-2/
Reviews
There are no reviews yet.