KLEIB S6 Joint Filling Compound With Fibre 10kg

KLEIB S6 is a gypsum joint compound for jointing gypsum boards with a suitable edge shape, without the use of
reinforcement tape.

• perfect for joining gypsum boards
• high yield
• easy to apply and process
• excellent workability and adhesion
• for manual application

USE
KLEIB S6 is a gypsum joint compound for jointing gypsum boards with a suitable edge shape, without the use of
reinforcement tape.
WORKING SURFACE PREPARATION
The joint surface should be free of any layers that may weaken joint compound adhesion, in particular dust, dirt, lime,
oil, grease, wax or the remains of emulsion and oil paint. The edges of the boards to be cut and worked should be
primed with KLEIB G1 primer before jointing. All steel elements exposed to the joint compound must be protected
against corrosion.
PREPARATION OF THE MIX
The joint compound is prepared by pouring dry mix into a container with a measured amount of water and mixing until
a smooth, uniform consistency is obtained. This is best done mechanically, using an electric drill with a mixer
attachment. The joint compound is ready to use after 5 minutes and after remixing. Prepared joint compound mix is to
be used within approx. 60 minutes.
INSTRUCTIONS FOR USE
In the first stage of work, the joint compound should be pressed into the joint with a putty knife or a plasterer’s float so
that it fills it thoroughly over the entire thickness. Then spread the joint compound evenly over the entire length of the
joint and smooth the surface. After joint compound is cured, the surface can be finally smoothed with fine sandpaper
or polycarbonate mesh.
USAGE
On average, 0.5 kg of the joint compound per 1 m² is used for each 1 mm of layer thickness.
TOOLS REQUIRED
Drill with a mixer attachment, putty knife, smooth steel plasterer’s float. Tools should be washed with clean water
immediately after use.
STORAGE AND TRANSPORT
The joint compound must be transported and stored in tightly sealed bags, in dry conditions (preferably on pallets).
Protect from moisture. Shelf life in conditions that comply with the specified requirements is up to 9 months from the
production date on the packaging

More informations: https://www.kleib.pl/en/produkty/s6-masa-szpachlowa/