Showing 505–528 of 2204 resultsSorted by average rating
15 in stock
£10.99 inc. VATKLEIB G1 is a ready-for-use primer intended for all absorbent and porous surfaces such as gypsum boards, plasterboards, plasters (gypsum, cement and cement-lime), concrete surfaces, aerated concrete and ceramics.
Thanks to its ability to even out the absorbency of a substrate, KLEIB G1 is particularly recommended to be used prior to painting surfaces with uneven absorption, e.g. surfaces partially covered in plasterboards or gypsum. This universal primer should be used on walls and ceilings prior to the application of ceramic tiles. KLEIB G1 also strengthens slightly chalky surfaces. For old and very chalky substrates we advise using KLEIB G2 deep-penetrating primer.
7 in stock
£19.49 inc. VATKLEIB S1 is a white dual-purpose joint compound used for sealing joints and spackling of plasterboard panels, as well as for finishing and decorating works in construction industry. KLEIB S1 can be used on cement and lime, concrete and gypsum substrates as well as plasterboard panels.
47 in stock
£3.49 inc. VAT
Out of stock
£5.89 inc. VATFEATURES:
PRODUCT MATERIAL:
rubber
PRODUCT APPLICATION:
for construction and finishing works also in the automotive industry to beat delicate elements
TECHNICAL DATA:
fi 65 mm
Out of stock
£7.69 inc. VATFEATURES:
PRODUCT MATERIAL:
rubber
PRODUCT APPLICATION:
for construction and finishing works also in the automotive industry to beat delicate elements
TECHNICAL DATA:
fi 60 mm / 450g
Out of stock
£3.99 inc. VATMATERIAL OF THE PRODUCT:
The adhesive layer made of synthetic rubber provides the ability to stick to most smooth surfaces.
APPLICATION OF THE PRODUCT:
The paper paint tape is designed for masking the surface when painting, painting as well as for other renovation and construction works.
SPECIFICATIONS OF TECHNICAL:
Width -30 mm
Length – 25 m
Adhesion to steel (for angle 180o) 5.5 N/inch
Elongation at break (stretility) 10%
Thickness of paper 75 μm
Total thickness 90 μm
Resistance to temperature of 60 degrees Cels
Type of Hot-melt adhesive
Adhesive quantity 15 g/m2
10 in stock
£4.09 inc. VATFEATURES AND ADVANTAGES
The long life of the product reduces the costs associated with the need to buy more shields.
FEATURES:
PRODUCT MATERIAL:
Elektrocorund
PRODUCT APPLICATION:
Grinding steel and metal products.
TECHNICAL DATA:
fi 230 x 6.0 x 22.23 mm
Out of stock
£20.99 inc. VATCEKOL C-45 is an excellent material for preparing walls and ceilings inside buildings for painting, paperhanging etc. Also for renovation of old plasters, plastering whole walls, stopping of cardboard-gypsum panels (for pointing and filling of scratches and cracks the CEKOL C-40 is recommended). CEKOL C-45 allows to obtain very smooth surfaces.
CEKOL C-45 is a dry mixture produced of the highest quality gypsum with a wide range of refining, modifying and plasticizing additives delaying setting and providing excellent adhesion to the gypsum, brick, concrete and gas concrete base. CEKOL C-45 is an excellent primer for the emulsion and acrylic paints. The white colour allows to apply fewer coats of paint to obtain full colour effect. It is an excellent ground for wall paper. It is non-toxic in application and use, made entirely of natural components. CEKOL C-45 does not turn yellow when exposed to light.
47 in stock
£24.99 inc. VATCEKOL F-16 Finish is a ready-to-use putty, for processing by wet floating. It is easy to grind when using the traditional machining method. After drying, it can be painted with all types of paints. Application and substrate temperature: +5oC to +30oC Layer thickness: up to 3 mm Efficiency: approx. 1.5 kg/m2/mm Drying time: depends on the thickness of the applied layer and ambient conditions: approx. 6 hours with a layer thickness of about 1mm (at a temperature of about 22oC and humidity of 30%).
• CEKOL F-16 Finisz is a ready-to-use, easily grindable putty.
• Recommended for classical grinding as well as wet treatment
• CEKOL F-16 Finisz can be used indoors in dry rooms, on concrete and plaster substrates, plasterboard panels, seasoned traditional cement-lime plasters, as well as acrylic paint coats with high surface adhesiveness.
• When dry, all paint types can be applied on it.
• The product can be applied manually or mechanically with suitable machines and tools.
• It is a mixture of special polymer binders, mineral fillers and modifying additives.
17 in stock
£20.49 inc. VATKLEIB S8 is a ready-made joint compound based on polymer binders, mineral fillers of optimum grain size and modifying additives. It is designed for finishing smoothing of wall and ceiling surfaces inside buildings. Properly selected rheological parameters allow easy application and processing. Owing to its properties it is perfect for final spackling on cured plaster, cement-lime, lime or gypsum coats, on plasterboard panels and concrete surfaces for all kinds of paint coatings. It can also be used to fill minor defects on the surface of walls and ceilings inside the buildings.
6 in stock
£1.99 inc. VATFEATURES:
COMPOSITION / MATERIAL:
Polyester
Latex (mad)
CATEGORY OF PROTECTION:
Cat. II
EN ISO 21420
EN 388-2131X
PROVISION OF PRINCATION:
Not to wash
4 in stock
£3.59 inc. VATFEATURES:
MATERIAL OF THE PRODUCT:
Grade 4.8 carbon steel, galvanized.
Example of use:
The element is mainly used for hanging air conditioning cables, suspended ceiling racks and rails and installation troughs. It is also used for craft and construction works.
SPECIFICATIONS OF TECHNICAL:
M14 x 1000 mm
15 in stock
£2.39 inc. VATFEATURES:
PRODUCT MATERIAL:
HSS steel
Out of stock
£48.59 inc. VATFEATURES:
PRODUCT MATERIAL:
forged carbon steel
PRODUCT APPLICATION:
for cutting and splitting wood
TECHNICAL DATA:
400 mm; 1150 g
1 in stock
£8.69 inc. VATFEATURES:
MATERIAL OF THE PRODUCT:
Steel HSS
APPLICATION OF THE PRODUCT:
Drilling holes in steel, plastics, wood.
APPLICATION – MATERIA
-Blass of ferrous and non-ferrous metals
-Profiles and pipes
– The copper, brass
-Aluminium – use drills without structural coating
-Stainless steel use only HSS-E/HSS-Cobalt step drill bits
– The Plastics
-Pech and roof sandwich panels
APPLICATION – INDUSTRY
-Electric / electrical installation:
Drilling in panels and switchboards for installation of connectors
-Hydraulic, heating, air conditioning and ventilation:
Revision openings etc.
– Machining / production:
different diameters and opening magnification
– The automotive industry:
Holes for cable installations (cellular phones, antennas, wiring)
– Maintenance and repair works:
different applications, e.g. opening augmentation
Grade drills have, as the name suggests, different degrees that cut out the desired diameter and the same differ from other types of drills.
They enable one instrument to produce holes of different diameters.
For HSS step rigs as coolant or grease
Apply sanding oil, oil for drilling and cutting or compressed air. For HSS rig without coating, the use of coolant is required.
SPECIFICATIONS OF TECHNICAL:
HSS step drill is a powerful, high-performance tool for seamless drilling
and removing the phyllors from sheets, pipes and profiles, etc.” Fi drill 4-12mm;
Stroke 1 mm ;
Holder fi 6 mm
Out of stock
£3.89 inc. VATFEATURES:
TECHNICAL DATA:
400 mm; PET fi 0.9 mm x 55 mm
Out of stock
£16.59 inc. VATFEATURES:
PRODUCT MATERIAL:
CrV
PRODUCT APPLICATION:
unscrewing and tightening threaded connections
TECHNICAL DATA:
1/2 ” 265 mm
Out of stock
£25.19 inc. VATFEATURES:
PRODUCT MATERIAL:
CrV
TECHNICAL DATA:
1/2 ” 250 mm
1 in stock
£15.49 inc. VATFEATURES AND AUTHORN
Good quality at a good price, it is the perfect set of tips for hobby applications and for DIYers.
FEATURES:
MATERIAL OF THE PRODUCT:
Steel S2
Out of stock
£3.89 inc. VATAPPLICATION OF THE PRODUCT:
for cleaning hands with dirt such as paints, greases, graphite, inks, adhesives, varnishes, bitumens, tar, resins and soot
Skin care and regeneration, leaving a feeling of softness
moisturizes the skin thanks to natural lipids, which makes it suitable for everyday use without negative impact on the skin
SPECIFICATIONS OF TECHNICAL:
Consistency: cream with the addition of natural abrasives
pH: 4.8 – 5.0
The smell: lemon
Color: white
Capacity: 250 ml ;
Dermatologically approved
4 in stock
£1.09 inc. VATFEATURES AND AUTHORIES
Wooden handle – is a natural material, hand-friendly and allows you to confidently lead the tool by providing comfort to the user.
Efficient and careful work – allows you to quickly and easily spread the groped and collect its excess, which makes it a popular and liked tool among glaguers.
APPLICATION OF THE PRODUCT:
Commonly used tool that helps in distributing joint mass during glazing.
SPECIFICATIONS OF TECHNICAL:
200 mm
Out of stock
£22.49 inc. VATFEATURES AND AUTHORIES
Good quality at a good price, it is the perfect set of tips for hobby applications and for DIYers.
MATERIAL OF THE PRODUCT:
Steel S2
Set includes:
Out of stock
£10.89 inc. VATFEATURES:
MATERIAL OF THE PRODUCT:
Steel
Out of stock
£6.59 inc. VATFEATURES:
MATERIAL OF THE PRODUCT:
Steel
