Showing 121–144 of 1694 resultsSorted by price: high to low
2 in stock
£21.99 inc. VATFEATURES:
MATERIAL OF THE PRODUCT:
Screws made of galvanized carbon steel.
APPLICATION:
For fixing for wooden, chipboard, plywood, wood-based materials.
Screws used for many assembly, construction, renovation and finishing works.
4 in stock
£21.99 inc. VATFEATURES:
MATERIAL OF THE PRODUCT:
Screws made of galvanized carbon steel.
APPLICATION:
For fixing for wooden, chipboard, plywood, wood-based materials.
Screws used for many assembly, construction, renovation and finishing works.
1 in stock
£21.89 inc. VATFEATURES:
2 in stock
£21.89 inc. VATFEATURES:
2 in stock
£21.59 inc. VATKLEIB Hydro is a flexible, single-ingredient isolating foil used for sealing absorbent mineral substrates. It is primarily used to make flexible priming layers for indoor ceramic tiles in order to seal walls and screeds in rooms with non-pressure moisture, i.e. bathrooms, toilets, kitchens and drying rooms. KLEIB Hydro is recommended for sealing moist areas around shower cabins, washbasins, baths and sinks.
1 in stock
£21.59 inc. VATFEATURES:
PRODUCT MATERIAL:
forged carbon steel
PRODUCT APPLICATION:
for cutting and splitting wood
TECHNICAL DATA:
800 g
6 in stock
£21.49 inc. VATKLEIB G5 Bonding primer is a ready-to-use preparation based on polymer resin for priming interior and exterior substrates before application of floor levelling mortars, joint compounds or adhesives for ceramic and stone tiles. Particularly recommended for use on smooth, poorly absorbent or non-absorbent substrates, such as smooth concrete, plasterboards, OSBs, terrazzo, ceramic tiles and dados. Thanks to the quartz aggregate content, the product creates an appropriately rough and coarse bonding layer on smooth and slick substrates, thus facilitating application of subsequent finishing layers. The product improves adhesion between coatings. It is water-resistant and has substrate-curing and adhesion-enhancing properties.
It strengthens substrates and improves adhesion to demanding surfaces (smooth concrete, plasterboards, OSBs, terrazzo, ceramic tiles and dados).
7 kg 90 approx. 0.25-0.35 kg/m depending on the type of substrate
• ready to use
• for indoor and outdoor use
• suitable for smooth and non-absorbent substrates
such as OSBs, ceramic tiles, terrazzo, concrete
• enhances adhesion,
• stabilizes the substrate
• creates a coarse bonding layer
• for walls and floors.
2 in stock
£21.49 inc. VATFEATURES:
PRODUCT MATERIAL:
plastic, steel
PRODUCT APPLICATION:
For measuring: long distances, thicknesses, heights
TECHNICAL DATA:
30m x 13mm
2 in stock
£21.29 inc. VATFEATURES:
APPLICATION OF THE PRODUCT:
-avens the application for convenient transport of various types of items, e.g. tools, etc.
SPECIFICATIONS OF TECHNICAL:
DIMENENSIONS
470 x 256 x 238mm / 19″ plastic
3 in stock
£21.29 inc. VATFEATURES:
MATERIAL OF THE PRODUCT:
Carbon steel, carbide sintered
APPLICATION OF THE PRODUCT:
Cutting wood, plywood, wood-based panels
SPECIFICATIONS OF TECHNICAL:
250mm x 30mm x 2.5mm
30 teeth
extra reduction 20, 16 mm
max 6100 rpm
2 in stock
£21.09 inc. VATFEATURES
anti-corrosion coating
32 pcs
5 in stock
£20.99 inc. VATFEATURES:
For applying 18mm hair smooth – the nylon roller fiber ensures abundant and easy scooping of the smooth and effective spreading, thanks to which renovation and finishing works are faster.
An efficient tool – the application strokes with a roller is quick and simple compared to the traditional method, which means that using the roller shortens the time of applying the smooth and its processing.
Equal coverage – which speeds up the process of renovation or finishing work, because an evenly applied smooth is ready to be pulled with a putty knife, without having to make corrections, which saves time.
PRODUCT MATERIAL:
Roller with 18mm nylon fibers
PRODUCT APPLICATION:
The smooth roller is a device used during finishing works. It is used to apply gypsum smoothness to both walls and ceilings. It greatly facilitates the work of contractors. Applying smoothies is much faster and more efficient.
TECHNICAL DATA:
250/48/18 / fi 8 mm
3 in stock
£20.99 inc. VATFEATURES:
COMPOSITION / MATERIAL:
100% polyester
PROTECTION CATEGORY:
Cat. IIEN 14404: 2004 + A1: 2010
OA0326
PROHIBITION:
wash manually
do not dry in the dryer
do not whiten
do not iron
do not dry clean
2 in stock
£20.59 inc. VATFEATURES AND AUTHORIES
They ensure the leveling of tiles with a thickness of 4 -12mm – they are a component of the system with a wedge. They maintain the correct level and aposure between the laid plates. Thanks to them, the clip will easily click into them and confidently keep it unsuccable, so that the stacked tiles are stabilized and do not move during work, and the work is efficient.
Element SYSTEM 2 – suitable for wall, floor and clinker tiles. Can be used inside and outside buildings
MATERIAL OF THE PRODUCT:
Plastic material
APPLICATION OF THE PRODUCT:
For glazing work, leveling of tiles. After drying the glue, the clips should be broken.
SPECIFICATIONS OF TECHNICAL:
14 x 29 x 20cm
34 in stock
£20.49 inc. VATKLEIB C11 StrongŻel is a cement-based adhesive for bonding wall and floor ceramic tiles (glazed tiles, terracotta tiles, clinker tiles), porcelain tiles and stone cladding. It can be used on all dry, even and structurally sound mineral substrates inside and outside buildings, also with underfloor heating systems. Suitable for bonding tiles with a surface area of less than 1 m².
| Adhesive layer thickness | Consumption kg per m² |
| 4 mm | 2,1 |
| 6 mm | 3,6 |
| 8 mm | 5,6 |
| 10 mm | 6,1 |
| 12 mm | 7,2 |
More informations : https://www.kleib.pl/en/produkty/c11-strong-zel/
17 in stock
£20.49 inc. VATKLEIB S8 is a ready-made joint compound based on polymer binders, mineral fillers of optimum grain size and modifying additives. It is designed for finishing smoothing of wall and ceiling surfaces inside buildings. Properly selected rheological parameters allow easy application and processing. Owing to its properties it is perfect for final spackling on cured plaster, cement-lime, lime or gypsum coats, on plasterboard panels and concrete surfaces for all kinds of paint coatings. It can also be used to fill minor defects on the surface of walls and ceilings inside the buildings.
5 in stock
£20.39 inc. VATFEATURES:
MATERIAL OF THE PRODUCT:
alloy of high quality steel
1 in stock
£20.19 inc. VATFEATURES:
CR-V steel – tools made of this material are less susceptible to breaking or deformation during use.
Relative lightness – despite its high strength, the tools from the CR-V are relatively light, which makes it easier to operate and carry them.
Durability: CR-V tools get increased elasticity, so they are less likely to be destroyed during intensive operation
FEATURES:
MATERIAL OF THE PRODUCT:
CrV
3 in stock
£19.99 inc. VATFEATURES:
Tool set made of CrV steel, featuring a 72-tooth ratchet. Contains 15 pieces and comes in convenient hanger packaging.
4, 4.5, 5, 5.5, 6, 7, 8, 9, 10,11 12, 13 mm
5 in stock
£19.99 inc. VAT3-Piece Extra Long Screwdriver Set – 450mm | Flat8, PH2, PH3 | CrV Steel
This set of three extra-long screwdrivers – flat and cross-head – is designed for precision and power in hard-to-reach areas. Each screwdriver measures 450 mm in length, making them perfect for deep or obstructed screw placements.
Key Features:
Length: 450 mm – ideal for accessing distant or confined spaces
Tips: Hardened and magnetized for better grip and screw retention
Material: Made of high-quality chrome-vanadium (CrV) steel, resistant to bending and wear
Design: Special shaft design allows for hammer impact and use with a flat wrench for increased torque
Handle: Ergonomic anti-slip handle (ERGO) ensures comfort, control, and efficient power transfer
Set Includes:
1 x Flathead (Flat8 x 450 mm)
1 x Phillips (PH2 x 450 mm)
1 x Phillips (PH3 x 450 mm)
Perfect for professionals and DIYers alike, this set is a reliable solution for tough screws in tight spaces.
1 in stock
£19.99 inc. VATFEATURES:
TECHNICAL DATA:
80 cm
1 in stock
£19.89 inc. VATFEATURES:
MATERIAL OF THE PRODUCT:
CrV
2 in stock
£19.79 inc. VATFEATURES AND AUTHORN
The very long life of the product allows you to reduce the costs associated with the pennience of purchasing subsequent holes.
The simple installation system in the CLICK system enables quick and efficient replacement, saving the user time.
The addition of cobalt allows drilling in stainless steels.
FEATURES:
MATERIAL OF THE PRODUCT:
Bimetallic steel
APPLICATION OF THE PRODUCT:
Drilling holes in steel, stainless steel, plastics.
1 in stock
£19.69 inc. VATFEATURES:
MATERIAL OF THE PRODUCT:
CrV
SPECIFICATIONS OF TECHNICAL:
76×215 mm
